Page 9 – Derates and Shutdowns

General Information

Config Date

Engine Serial Number

Engine Location

Center Port Starboard

Configuration

Initial Periodic Inspection Adjusted

If adjusted from prior settings, brief description of reason for changes

Vessel Name

Authorized Tech. Name

Company

Type of Company

Dealer Distributor

Derate and shutdown information can be found in Service Advisor by the following steps:

Connect to Service Advisor.
From the Home icon, pick “Reprogramming”.
If the payload is already downloaded on your laptop, proceed to step 6.
Select “Engine”, pick “Action” pull-down, click “Go”.
From the Options window, select “Reprogramming current ECU”, click “Done”.
The current payload will be downloaded to the computer. Select “Back”.
Select “Engine”, from the Action pull-down, pick “Start Reprogramming”. If the EDL is connected, pick which type you are using, select “Go”.
The changes can be made before connecting to the engine by picking “Proceed”. Otherwise, an EDL needs to be connected and selected from the options pull-down.
Trim page is available for review/editing.
Use the final “Report” tab to print out the revised settings if desired.

Factory settings for all engine derates and shutdowns: Derate = Enabled and Shutdown = Disabled.

Derate - Settings Today (applies to all Group 1)

Enabled Disabled

Shutdowns - Settings Today (Group 2.2)	Enabled	Disabled
Engine Overspeed

Reference table carried over from the source form.

Parameter	Trouble Code	Default Lamp Color
Water-in-Fuel (Shutdown)	97.00	Red
Oil Pressure (Shutdown)	100.01	Red
Oil Pressure	100.18	Amber
Manifold Air Temperature (Shutdown)	105.00	Red
Manifold Air Temperature	105.16	Amber
Coolant Temperature (Shutdown)	110.00	Red
Coolant Temperature	110.16	Amber
Fuel Rail Pressure (Shutdown)	157.01	Red
Fuel Rail Pressure	157.18	Amber
Fuel Temperature (Shutdown)	174.00	Red
Low Coolant Level (Shutdown)	111.01	Red
Crank Timing Sensor	637.02	Amber
Crank Timing Sensor	637.08	Amber
Crank Timing Sensor	637.10	Amber
ECU Temperature	1136.00	Red
Fuel Rail Pressure Sensor Voltage	157.03	Red
Fuel Rail Pressure Sensor Voltage	157.04	Red
Air Filter Restriction	107.31	Red
Engine Overspeed (Shutdown)	190.00	Red

Signature Date

John Deere Auth Tech

Dealer Representative

Vessel Representative

Distributor Representative

Shutdowns - Settings Today (Group 1)	Enabled	Disabled
Water-in-Fuel
Oil Pressure
Manifold Air Temperature
Coolant Temperature
Fuel Rail Pressure
Fuel Temperature
Low Coolant Level (4)

Derate - Settings Today (Group 2)	Enabled	Disabled
Fuel Rail Pressure Sensor Voltage - 1
Fuel Rail Pressure Sensor Voltage - 2
Air Filter Restriction
Engine Overspeed