Page 8 – Data Log

Page Setup / Production Sea Trial

Production Sea Trial This page is being used for a Production Sea Trial

Engine Performance Data Log

Engine limits use the Page 1 engine selection when available.

Sized to stay within the page width and scale with the browser or device.

RPM (Circle Cruising)	1000	1200	1400	1600	1800	2000	2200	Rated	Max	Limits
Ambient Air Temp °F °C										N/A
Vessel Speed (Knots) Units: Knots										N/A
Analog Input 1: Coolant Pump Inlet Press psi kPa										—
Analog Input 3: Exhaust Back Press psi kPa										—
Analog Input 4: Fuel Inlet Pressure psi kPa										—
Analog Input 5: Fuel Return Pressure psi kPa										—
Analog Input 7: Aux Temp 1 (Air Cleaner) °F °C										Amb +17C/30F
Analog Input 8: Air Inlet Restriction psi kPa										—
Analog Input 9: Aux Temp 2 (Eng Room) °F °C										—
Barometric Air Press psi kPa										N/A
Engine Coolant Temp °F °C										—
Engine Load (%) Units: %										—
Engine Oil Pressure psi kPa										N/A
Fuel Usage Rate gph Lph										N/A
Manifold Air Press (Boost) psi kPa										N/A
Manifold Air Temp °F °C										—
TC 1: Coolant Pump Inlet Temperature °F °C										N/A
TC4: Fuel Return Temperature °F °C										N/A
TC3: Exhaust Temperature °F °C										N/A
Sea Water Temp °F °C										N/A
Heat Exchanger (HE) & Dual Circuit Keel Cooled (DCKC) Only
Inlet Pressure: Sea Water (HE) / CAC Coolant (DCKC) psi kPa										—
Inlet Temp: Sea Water (HE) / CAC Circuit (DCKC) °F °C										N/A DCKC: 27°C/81°F
Return/Out Temp: Sea Water (HE) / CAC Coolant (DCKC) °F °C										N/A

Production Sea Trial

Production sea trial data set adapted from the source form. Prior John Deere approval required.

Engine Serial Number

Perf Curve Date

Article 1 App Review No.

Application Review Number

Cruise RPM

Rated RPM

Max RPM

Production sea trial units are selected by row below, matching the source data collection layout.

Production Sea Trial Data Points	Cruise	Rated	Max	Limits
RPM Units: RPM				N/A
Ambient Air Temperature °F °C				N/A
Vessel Speed (Knots) Units: Knots				N/A
Barometric Air Pressure* psi kPa				N/A
Fuel Usage Rate* gph Lph				N/A
Sea Water Temperature °F °C				N/A
Engine Coolant Temperature* °F °C				—
Engine Load at Current Speed* Units: %				—
Engine Oil Pressure* psi kPa				—
Manifold Air Pressure--Actual/Boost Press.* psi kPa				—
Manifold Air Temperature* °F °C				—

* Denotes a parameter that can be monitored via Service ADVISOR™. The source form also notes that some cooling inlet data may be N/A where the port is not available on the base engine.

HE / DCKC Notes

Notes / Comments