Page 7 – Serviceability Checklist

Marine Gen Drive Engine Application Review Form – August 2025

Inspect serviceability and access items, then record comments and recommendations.

Sections

Jump to any section.

Serviceability Checklist

Inspect all items below and determine if serviceability/access of the item is acceptable in the currently installed condition. If not, notify the vessel representative to aid in ease of service at a later date.

General

Operator manual reviewed with customer

Yes No

Daily Maintenance & Checks

Check oil level

N/A Yes No

Add oil

N/A Yes No

Check coolant level

N/A Yes No

Add coolant

N/A Yes No

Check & drain fuel water separator

N/A Yes No

Adjust hose clamp tension

N/A Yes No

Close seacock

N/A Yes No

Clean sea water strainer

N/A Yes No

Fuel return valve open

N/A Yes No

Access to hand primer

N/A Yes No

Regular Maintenance

Change engine oil

N/A Yes No

Replace oil filters

N/A Yes No

Replace air cleaners

N/A Yes No

Replace fuel filters

N/A Yes No

Adjust valve lash

N/A Yes No

Change engine coolant

N/A Yes No

Replace vibration damper

N/A Yes No

Service crankcase vent system

N/A Yes No

Replace zinc anodes

N/A Yes No

Replace raw water pump impeller

N/A Yes No

Clean & remove heat exchanger core

N/A Yes No

Clean and remove CAC core

N/A Yes No

Adjust all belt tension

N/A Yes No

Sea Trial and Serviceability Comments and Recommendations

Enter comments, exceptions, serviceability concerns, and recommended follow-up actions.

Accuracy / Acknowledgement Statement

By signing on the next page, all parties are indicating that the information in the application review form is accurate to the best of their knowledge and any data points not meeting John Deere requirements have been noted and communicated to the vessel representative with the understanding that those points not meeting John Deere requirements could lead to reliability issues.

Previous Next Page